24 X 7    CALL : (289) 807-0034

Have you noticed the washing machine dancing about in the laundry room as it washes your clothes? It may be shaking as well as vibrating. You may even be worried that it is going to launch itself up into space. This doesn’t mean that you have to purchase a new washing machine; it just means that you have to make some minor adjustments to your washing machine in order to settle it down and restore its foundation.

1. Check that your loads are balanced

Many times, the washing machine is off balance due to the way the clothes are distributed inside the unit. You may have heavy jeans and shirts inside the washer and if you have the jeans on one side of the drum, it may cause the drum to become imbalanced whenever it reaches the spin cycle. This is a more common issue when you have a top loading washer compared to the front loader.

2. Check the floor and machine are level

Sometimes the washer can be off level because of the flooring. There are tools that you can use to help you level up the washing machine on the floor. The first tool you will want to have with you is the level. First ensure that the floor is level using this tool. If it is not, you may be able to adjust the washer more on one side than the other in order to accommodate. Once you have finished leveling it up, use the level to help you determine when the washer is completely level by placing this tool on top of the washer. Adjust as necessary until you have accomplished the right adjustment.

3. Ensure You Have a Sturdy Floor

The issue of the washer shaking could be further than just the machine itself. It could also be because your floor is not sturdy enough. If you walk across your floor and it shakes when you do, then the floor and not the washing machine may be the culprit. You may need to add floor support in this particular area of your home in order to level it out and help to support it. Cut a piece of 3/4 inch plywood to the depth of the front of the washing machine to the back wall of the room. Cut it also to the width of the washer and dryer combination if you have both side by side. If not, just focus on the washer. Once you cut it, slide it up underneath the appliance to help brace it.

4. Check Your Stacking Kit

If you have a washer and dryer stacked one on top of another, then you most likely have them supported by a metal frame that mounts up underneath the lower unit. If this is the type that you have, make sure that they are connected securely. You will want to make sure that the floor underneath this duo is sturdy and braced if needed in order to keep them from moving around and bouncing.

5. Purchase Washing Machine Vibration Pads

Because washing machines are known to bounce and vibrate, there are washing machine vibration pads that you can purchase. These pads help to absorb the sound and movement of the machine so they are quiet. Many of these pads come in a simple mat like frame and are made with rubber for the washer and dryer to sit on. These come in many different sizes, shapes, and materials for you to customize for your needs.

6. Call in Some Reinforcement

When in doubt, call an appliance repair professional in Thornhill. You may be washing clothes and your neighbor may be pounding on your door because of all the noise your machine is making. Try these simple tips and if they don’t work, call a professional. Don’t replace your washer or dryer until they quit working on your because many times, it is the flooring or something to do with the room rather than the unit. However, if your washing machine is allowed to shake all the time, it will eventually wear down and you will need to replace it sooner rather than later.

Categories : Appliance Repair